EC9 SERIES
 

Print  print

Performance

Accessories

Product Images

CSA Approved
Model EC9 Series
Effluent Pump, Cast Iron, 2 HP, 230V, Manual Switch, 3/4" Solids Handling, 2" NPT Discharge
The EC9 Series pump is a rugged, submersible cast iron pump with a non-clog, semi-open impeller and solids handling capability to 3/4".
Key features
  • 2 HP
  • Class 30 cast iron construction
  • 2" (50.8mm) NPT discharge
  • Dual Silicon Carbide mechanical seals
  • Standard controls available for automatic operation
  • Oil-filled motor with automatic reset overload provides safe operation
  • Ball bearing construction for long life
  • Easily replaceable power cord with optional lengths available
Warranty

1-year limited warranty

SPECIFICATIONS    
RESOURCES    

 

BODY CONSTRUCTION:  Cast iron

HORSEPOWER:  2 HP

MAXIMUM HEAD:  85 FT (25.9 M)

MAXIMUM CAPACITY:  160 GPM (605 LPM)

FLOW AT 10' LIFT:  10' is Outside of Performance Curve

SWITCH:  No switch, Manual operation

MOTOR:  3450 RPM, PSC with thermal overload

IMPELLER:  Cast iron

SHAFT SEAL:  Primary: mechanical type 6A or equal, Buna-N elastomers, silicon carbide sealing fades, stainless steel metal parts Secondary: self-lubricating lip seal

BEARINGS:  Ball type, oil lubricated

EXTERIOR HARDWARE:  Stainless steel

MINIMUM SUMP DIAMETER:  18" (457mm)

DISCHARGE SIZE:  2" (50.8mm) NPT

MAXIMUM OLIDS HANDLING SIZE:  3/4" spherical capability

AMP DRAW:  9.3 amps at full load

POWER CORD:  20' oil and water resistant 16-3 SJTW-A/SJTW with integrally grounded 3-prong plug. UL listed

VOLTAGE:  230 volts, 60 Hz, 1-phase

MAXIMUM LIQUID TEMPERATURE:  130°F (55°C)

Owner's Manual: EC6, EC7, EH7, HT7, SC7, SCC7, SC9, SCC9, EC9
DOWNLOAD MANUAL
Specifications: HT7, EC9
DOWNLOAD SPECS